鎳合金我們的內部配方、擠壓、拉伸和制造能力使Arcos成為焊接行業定制高完整性合金的首要供應商。Arcos電極有3/32“，1/8”，5/32”和3/16”直徑，密封罐中。我們的研發為業界提供了＊為廣泛接受的ENiCrFe-3（Arcos 8N12）。重新調制的鎳合金電極在整個工業中經常被優先選用。了解產品可點擊查看，產品加載慢，請耐心等待，您也可以來電咨詢產品18121363736微信同步Bare WiresArcosAWSMilitaryApplications382ERNiCr-3EN/RN82Welding of alloys 600, 601 and alloy 800 to themselves and dissimilar welding of stainless to carbon steels.352ERNiCrFe-7N/AWeld NiCrFe alloys ASTM B163, 166, 167 and 168.392ERNiCrFe-6EN6A/RN6AClad steel with NiCrFe weld metal and join steel and stainless steel to nickel base alloys.617ERNiCrCoMo-1N/AWeld NiCrCoMo base material and join various dissimilar high-temperature alloys.625ERNiCrMo-3EN/RN625Useful for various dissimilar joints involving nickel alloys, carbon steel, low alloy and stainless steels. Primarily used on alloys 625, 601, 802 and 9% nickel.651(99 Nickel)ERNi-ClN/ACommercially pure nickel for welding ductile, malleable and grey cast iron.813ERCuNiEN/RN67Weld 70/30, 80/20 and 90/10 copper nickel alloys.816ERNiCu-7EN/RN60Weld nickel-copper alloys B127, 163, 164 and 165.861ERNi-1EN/RN61Weld wrought and cast forms of commercially pure nickel ASTM B160, 161, 162 and 163.2216(44 Nickel)ERNiFeMn-ClN/ADeveloped for welding of nodular, grey, spheroidal graphite and malleable cast irons to themselves or to other materials including stainless steel, carbon steel, low alloy steel and various nickel alloys.C-276ERNiCrMo-4N/AWeld NiCrMo base metal to itself, steel and most other nickel based alloys622ERNiCrMo-10N/AWeld NiCrMo alloys to itself, steel, to other nickel base alloys and for cladding steel with NiCrMo weld metal.Alloy 59ERNiCrMo-13N/AThis nickel-chromium-molybdenum alloy is used to weld low-carbon NiCrMo alloys.Covered ElectrodesArcosAWSMilitaryApplications1N12ENiCrMo-31N12Use to join NiCrMo alloys such as 625, 800, 801, 825 and 600.8N12ENiCrFe-38N12/HWeld similar NiCrFe composition base metals to themselves and carbon steel.4N1AENiCrFe-24N1AThis electrode is used for various dissimilar combinations of austenitic and ferritic steels and high nickel alloys. Also can be used for welding 9% nickel.9N10ENiCu-79N10Primarily used for welding nickel copper alloys to themselves and to steel.352ENiCrFe-7N/AWeld NiCrFe alloy 690 (UNS N06690) to themselves.C-276ENiCrMo-4N/AWeld C-276 to itself and most other nickel based alloys.617ENiCrCoMo-1N/AWeld NiCrCoMo base material and join various dissimilar high temperature alloys.803ECuNiCuNiWeld wrought or cast 70/30, 80/20 and 90/10 copper nickel alloys.Alloy 59ENiCrMo-13N/AWeld low-carbon NiCrMo alloys.622ENiCrMo-10N/ANickel-chromium-molybdenum alloy is used to weld low-carbon NiCrMo alloys.不銹鋼合金無論您需要商業產品還是經過特殊測試的產品，我們的貨架上都有一整套不銹鋼裸絲和涂層電極，所有這些都有＊新AWS規范的認證。大多數產品都按照＊新的美國機械工程師協會第三節和軍用規范進行測試，并可立即裝運。Arcos電極包裝在3/32“、1/8“、5/32”和3/16“直徑的密封金屬罐中，庫存有-15、-16和-17型。裸絲合金有0.020“到0.187”直徑。材料包裝為：2磅、10磅、30磅、33磅和40磅線軸；250磅、500磅和800磅高級包；50磅或60磅埋弧焊線軸。12“、14“、18”和36“TIG線為單面標記、雙面標記或噴墨打印。特殊顏色編碼和標記要求可根據要求提供?？商峁┑吞?、高碳或高硅化學成分的標準合金：AlloyDescription9015-B9 90SB-9Arcos 9015-B9 and 90SB-9 for welding higher chromium alloyed 9CrMoNbV Steel (P91) used in piping systems where elevated temperatures and pressures are required.16-8-2Arcos 16-8-2 is primarily used for welding stainless steel, such as Types 16/8/2, 316 and 347, for high pressure piping systems.25/35RArcos 25/35R is used for welding centrifugal cast stainless tubes and pipe of HP, HP-45 High Alloy and equivalent of similar grades of Iron-Chromium-Nickel heat cast alloys.308Arcos 308 is designed for welding grades of similar chemical composition alloys in wrought or cast form, such as AISI Types 301, 302, 304 and 305.309Arcos 309 is commonly used for welding similar alloys in wrought or cast form and for welding dissimilar metals.310Arcos 310 is used to weld stainless steel of similar composition in cast or wrought form.310HCArcos 310HC is used primarily for welding or repairing high alloy heat and corrosion resistant castings of the same general composition which are designated as Type HK by the Alloy Casting Institute.312Arcos 312 to weld cast alloys of similar composition and dissimilar metals.316Arcos 316 is commonly used for welding Type 316 and similar chemical composition alloys in wrought or cast form.317LArcos 317L is used for welding alloys of similar composition and are utilized in severely corrosive environments.320Arcos 320 for welding Carpenter 20Cb-3* type stainless steels.320LRArcos 320LR is primarily used for welding Carpenter 20Cb-3* type stainless steels.330Arcos 330 is used where heat and scale resisting properties above 1800F (980C) are required.330HCArcos 330HC is used primarily for the welding and repairing of high alloy heat and corrosion resistant castings of the same general composition which are designated HT by the Alloy Castings Institute.347Arcos 347 is used for welding grades of similar chemical composition such as 302, 304, 321 and 347.409CbArcos 409Cb for 409 and 18CrCb steel exhaust systems has a chrome enriched ferritic microstructure. It is used on heat and corrosion resistant steels of similar composition.410Arcos 410 common application is for welding alloys of similar composition.410NiMoArcos 410NiMo is used for welding ASTM CA6NM castings as well as type 410,410S and 405 base metals.430LCbArcos 430LCb is used for automotive stainless steel exhaust systems. Superior corrosion characteristics and resistance to cracking are major advantages of this alloy.439TiArcos 439Ti is commonly used for welding for 409, 439, 18CrCb and carbon steel exhaust systems and a variety of applications in the power generation, petroleum refining and chemical process industries.